AMMCO & Coats Warranty Information

Equipment Online
Brake Lathe Limited Warranty
Wheel Balancers
Brake Lathes
HENNESSY INDUSTRIES, INC. warrants all Ammco Brake Lathes, Brake Service Tools and Engine Service Tools described below are fit for normal use and service and are free from defects in materials and workmanship existing when these products leave the control of HENNESSY INDUSTRIES, INC.

The WARRANTY PERIOD for each product follows:

Flywheel Grinders
Lifts
MotorVac Products
Tire Changers
Wheel Balancers
Parts Online
Product Parts Labor & On -Site Charges
All On Vehicle Brake Lathes 1 Year 6 Months
All Bench Brake Lathes 1 Year (1) (3) 6 Months (3)
All Heavy Duty Brake Lathes 1 Year (1) (3) 90 Days
All Arbors, Adapters and Accessories 1 Year ( 1 ) (2) (3)
All Brake Service Tools 1 Year (2)
All Engine Service Tools 1 Year (2)
Brake Lathe Breakdowns and Parts
Brake Lathe Breakdowns and Parts
Tire Changer Breakdowns and Parts
Wheel Balancers Breakdowns and Parts
Used & Rebuilt Equipment
Internet Specials
(1) Runout on arbors and adapters 30 days.

(2) For 1 year end user pays freight to Authorized Service Center, Hennessy pays return freight to end user

(3) 90 days on Belts and Environmental Lathe Enclosures

All warranties shall commence on the date of delivery to the first retail buyer or put into use, whichever is earlier. Further, all warranties apply only to defects in materials and workmanship existing when the product leaves the control of HENNESSY INDUSTRIES, INC. which are discovered and reported to HENNESSY INDUSTRIES, INC. within the warranty period specified above.

THE EXCLUSIVE REMEDY for any breach of this warranty shall be the repair or replacement, at the option of HENNESSY INDUSTRIES, INC., of any defective part or parts, free of charge including labor per the above schedule, by the designated HENNESSY INDUSTRIES, INC. Authorized Service Center. This warranty shall not apply when failure is caused by the purchaser's misuse, abuse, neglect or by unauthorized alterations or repairs. HENNESSY INDUSTRIES, INC. will not be responsible for loss of business or wages due to a product failure during the warranty period. This warranty extends only to the original using purchaser and is not assignable or transferable either voluntarily or by operation of law. This warranty applies only to equipment sold and used in Canada and the United States (excluding U.S. possessions such as Guam and Puerto Rico). For equipment sold andlor used outside of Canada or the United States of America, no warranty is made or implied, except the warranty available by and through HENNESSY INDUSTRIES, INC.'s authorized importerldistributor in the country in which the equipment is used.

This warranty shall not apply to regular maintenance required in the ordinary course of use of the above specified products, ordinary wear and tear or items or supplies ordinarily used up, consumed or worn out in the normal course of use of the products specified above, such as carbide toolbits, silencer bands, magnetic and pressure silencers.

HENNESSY INDUSTRIES, INC. reserves the right to make changes in design and/or improvements to its products without any obligation to include these changes in any products previously manufactured. Correction of defects by repair or replacement shall be THE EXCLUSIVE REMEDY under this warranty and shall satisfy all warranty obligations on the part of HENNESSY INDUSTRIES, INC.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THIS WARRANTY IS IN LIEU OF ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS OF ANY PURPOSE AND OF ANY OTHER OBLIGATION ON THE PART OF THE SELLER. UNDER NO CIRCUMSTANCES SHALL HENNESSY INDUSTRIES, INC. BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES.

HENNESSY INDUSTRIES, INC. neither assumes nor authorizes any person to assume for it any obligation or liability other than as herein expressly stated.

Tire Changers Limited Warranty
HENNESSY INDUSTRIES, INC. warrants all Coats Tire Changers and Inflation Equipment products described below are fit for normal use and service and are free from defects in materials and workmanship existing when these products leave the control of HENNESSY INDUSTRIES, INC.

The WARRANTY PERIOD for each product follows:

Product Parts Labor & On -Site Charges
All Center Post Tire Changers 2 Years (1) 90 days
All Rim Clamp Tire Changers 1 Year (1)(3) 6 Months
All Heavy Duty Tire Changers 1 Year (1) 90 Days
Model 6160 Heavy Duty Inflation Chamber 1 Year (1) 90 days
Tire Changer and Inflation Accessories 1 Year (1) (2)
(1) Air Chuck, Belts, and Gauges are warranted for 90 days.

(2) For 1 year end user pays freight to Authorized Service Center, Hennessy pays return freight to end user.

(3) 5 years -Transmission Only

All warranties shall commence on the date of delivery to the first retail buyer or put into use, whichever is earlier. Further, all warranties apply only to defects in materials and workmanship existing when the product leaves the control of HENNESSY INDUSTRIES, INC. which are discovered and reported to HENNESSY INDUSTRIES, INC. within the warranty period specified above.

THE EXCLUSIVE REMEDY for any breach of this warranty shall be the repair or replacement, at the option of HENNESSY INDUSTRIES, INC., of any defective part or parts, free of charge including labor per the above schedule, by the designated HENNESSY INDUSTRIES, INC. Authorized Service Center. This warranty shall not apply when failure is caused by the purchaser's misuse, abuse, neglect or by unauthorized alterations or repairs. HENNESSY INDUSTRIES, INC. will not be responsible for loss of business or wages due to a product failure during the warranty period. This warranty extends only to the original using purchaser and is not assignable or transferable either voluntarily or by operation of law. This warranty applies only to equipment sold and used in Canada and the United States (excluding US. possessions such as Guam and Puerto Rico). For equipment sold andlor used outside of Canada or the United States of America, no warranty is made or implied, except the warranty available by and through HENNESSY INDUSTRIES, INC.3 authorized importerldistributor in the country in which the equipment is used.

This warranty shall not apply to regular maintenance required in the ordinary course of use of the above specified products, ordinary wear and tear or items or supplies ordinarily used up, consumed or worn out in the normal course of use of the products specified above, such as wheel protectors, boots, booties, nylon mountldemount head, mountldemount head nylon inserts and bead loosener pads.

HENNESSY INDUSTRIES, INC. reserves the right to make changes in design andlor improvements to its products without any obligation to include these changes in any products previously manufactured. Correction of defects by repair or replacement shall be THE EXCLUSIVE REMEDY under this warranty and shall satisfy all warranty obligations on the part of HENNESSY INDUSTRIES, INC.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THIS WARRANTY IS IN LIEU OF ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS OF ANY PURPOSE AND OF ANY OTHER OBLIGATION ON THE PART OF THE SELLER. UNDER NO CIRCUMSTANCES SHALL HENNESSY INDUSTRIES, INC. BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES.

HENNESSY INDUSTRIES, INC. neither assumes nor authorizes any person to assume for it any obligation or liability other than as herein expressly stated.

Wheel Balancers Limited Warranty
HENNESSY INDUSTRIES, INC. warrants all Coats Computer Wheel Balancers described below are fit for normal use and service and are free from defects in materials and workmanship existing when these products leave the control of HENNESSY INDUSTRIES, INC.

The WARRANTY PERIOD for each product follows:

Product Parts Labor & On -Site Charges
Model 700 1 Year (1) 6 Months
Model 850 1 Year (1) 6 Months
Model 950/1025/1050/
1055/XR1750/XR1800
12 Months (2) 6 Months
Model IBS 2000 12 Months (2) 6 Months
Model 6401 (Heavy Duty) 1 Year 90 Days
Model 6200 HS 1 Year (5)
Hennessy Accessories 1 Year (3) (4)
(1) 2 years on motor and 2 years on printed circuit board.

(2) 3 years on motor and 3 years on printed circuit board.

(3) For 1 year end-user pays freight to Authorized Service Center, Hennessy pays return freight to end user.

(4) 90 days on Model 520 Wheel Lift

(5) For 1 year Hennessy provides balancer head exchange service and pays freight to and from factory for user installation.

All warranties shall commence on the date of delivery to the first retail buyer or put into use, whichever is earlier. Further, all warranties apply only to defects in materials and workmanship existing when the product leaves the control of HENNESSY INDUSTRIES, INC. which are discovered and reported to HENNESSY INDUSTRIES, INC. within the warranty period specified above.

THE EXCLUSIVE REMEDY for any breach of this warranty shall be the repair or replacement, at the option of HENNESSY INDUSTRIES, INC., of any defective part or parts, free of charge including labor per the above schedule, by the designated HENNESSY INDUSTRIES, INC. Authorized Service Center. This warranty shall not apply when failure is caused by the purchaser's misuse, abuse, neglect or by unauthorized alterations or repairs. HENNESSY INDUSTRIES INC. will not be responsible for loss of business or wages due to a product failure during the warranty period. This warranty extends only to the original using purchaser and is not assignable or transferable either voluntarily or by operation of law. This warranty applies only to equipment sold and used in Canada and the United States (excluding U.S. possessions such as Guam and Puerto Rico). For equipment sold andlor used outside of Canada or the United States of America, no warranty is made or implied, except the warranty available by and through HENNESSY INDUSTRIES, 1NC.k authorized importerldistributor in the country in which the equipment is used.

This warranty shall not apply to regular maintenance required in the ordinary course of use of the above specified products, ordinary wear and tear or items or supplies ordinarily used up, consumed or worn out in the normal course of use of the products specified above.

HENNESSY INDUSTRIES, INC. reserves the right to make changes in design andlor improvements to its products without any obligation to include these changes in any products previously manufactured. Correction of defects by repair or replacement shall be THE EXCLUSIVE REMEDY under this warranty and shall satisfy all warranty obligations on the part of HENNESSY INDUSTRIES, INC.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THIS WARRANTY IS IN LIEU OF ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS OF ANY PURPOSE AND OF ANY OTHER OBLIGATION ON THE PART OF THE SELLER. UNDER NO CIRCUMSTANCES SHALL HENNESSY INDUSTRIES, INC. BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES.

HENNESSY INDUSTRIES, INC. neither assumes nor authorizes any person to assume for it any obligation or liability other than as herein expressly stated

Parts Limited Warranty
HENNESSY INDUSTRIES, INC. warrants all Ammco and Coats Service Parts described below are fit for normal use and service and are free from defects in materials and workmanship existing when these parts leave the control of HENNESSY INDUSTRIES, INC.

The WARRANTY PERIOD for each product follows:

Product Parts Labor & On -Site Charges
All Ammco & Coats Service Parts (1) 6 Months (4) 30 Days (2) (3) (4)
(1)Electronic Components are only warranted if installed by Hennessy Authorized Service Center.

(2)Labor and On-Site charges apply only if originally installed by Authorized Service Center.

(3)Shippable service parts that are not installed in equipment: end-user pays freight to Authorized Service Center, Hennessy pays return freight to end-user.

(4)Lift parts are warranted for 90 dayslno labor.

This warranty applies only to purchased service parts. It does not affect parts replaced during andlor covered by an original equipment warranty. All warranties shall commence on the date of delivery to the first retail buyer or put into use, whichever is earlier. Further, all warranties apply only to defects in materials and workmanship existing when the product leaves the control of HENNESSY INDUSTRIES, INC. which are discovered and reported to HENNESSY INDUSTRIES, INC. within the warranty period specified above. Original customer billing invoice shall serve as proof of purchase and starting date of this warranty.

THE EXCLUSIVE REMEDY for any breach of this warranty shall be the repair or replacement, at the option of HENNESSY INDUSTRIES, INC., of any defective part or parts, free of charge including labor per the above schedule, by the designated HENNESSY INDUSTRIES, INC. Authorized Service Center. This warranty shall not apply when failure is caused by the purchaser's misuse, abuse, neglect or by unauthorized alterations or repairs. HENNESSY INDUSTRIES, INC. will not be responsible for loss of business or wages due to a product failure during the warranty period. This warranty extends only to the original using purchaser and is not assignable or transferable either voluntarily or by operation of law. This warranty applies only to product sold and used in Canada and the United States (excluding US. possessions such as Guam and Puerto Rico). For product sold andlor used outside of Canada or the United States of America, no warranty is made or implied, except the warranty available by and through HENNESSY INDUSTRIES, 1NC.k authorized importerldistributor in the country in which the product is used.

This warranty shall not apply to regular maintenance required in the ordinary course of use of the above specified products, ordinary wear and tear or items or supplies ordinarily used up, consumed or worn out in the normal course of use of the products specified above. Such items shall include, but not be limited to the following: rubber lift pad inserts, carbide toolbits, silencer bands, magnetic and pressure silencers, wheel protectors, boots, booties, nylon mounffdemount head, rnounffdemount head nylon inserts and bead loosener pads.

HENNESSY INDUSTRIES, INC. reserves the right to make changes in design andlor improvements to its products without any obligation to include these changes in any products previously manufactured. Correction of defects by repair or replacement shall be THE EXCLUSIVE REMEDY under this warranty and shall satisfy all warranty obligations on the part of HENNESSY INDUSTRIES, INC.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THIS WARRANTY IS IN LIEU OF ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS OF ANY PURPOSE AND OF ANY OTHER OBLIGATION ON THE PART OF THE SELLER. UNDER NO CIRCUMSTANCES SHALL HENNESSY INDUSTRIES, INC. BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES.

HENNESSY INDUSTRIES, INC. neither assumes nor authorizes any person to assume for it any obligation or liability other than as herein expressly stated.