ProAir Plus High Performance Compressed Air Piping System is Perfect for Applications that Require Pressures up to 250psig.It’s Easy to Use, Easy to Install, and Easy to Reconfigure.

ProAir is a reliable, light-weight, easy-to-install piping solution for your entire compressed air system. From the air receiver to the point of use,  ProAir Plus will ensure reduced pressure loss, higher air quality ,more efficient air delivery, and higher flow rates. Installing ProAir  Plus is simple and quick—compression fittings make connections a breeze. And it’s just as easy to disconnect in order to reconfigure or extend the system.

ProAir Water Trap Tee

The unique ProAir Water Trap Tee helps reduce moisture in a compressed air piping system and provides an easy alternative to installing “swan/goose necks.”The innovative inside arrangement of the fitting allows air to flow ,with minimum head loss ,from the distribution system to take-off points without allowing water to follow. The moisture is retained in the line to be drawn off at a suitable location.

ProAir Water Trap Tee Converter

The ProAir Water Trap Tee Converter easily converts a standard 1-1/4" (28mm) tee to a Water Trap Tee. When fitted, it will stop condensed water in the piping system from entering the vertical take-off spurs. It is important that the piping system has been installed with the correct gradient, and that water drain points are properly vented.