ALI/ETL Certified
Lifting Capacity: 10,000 lb.
Max Load per Arm: 2,500 lb.
Rise Height: 78.75"
Height Overall: 12 '3 1/2" or 11' 5 1/2"
Width Overall: 131 3/4"
Drive Thru Clearance: 98 3/8"
Floor to Overhead: 11' 8 1/2" or 10' 10 1/2"
Front Arm Reach: 21 3/4" - 39 1/4"
Rear Arm Reach: 38 1/4" - 55 3/8"
Screw Pad Height: 4" - 7 1/2"
Inside Columns: 110 1/4"
Motor: 2HP
Voltage Single Phase: 208-230v
Ceiling Height Required: 12' 5"
Concrete shall have a compression of 3500 PSI and a minimum thickness of 4"
12' Minimum Clearance to Obstruction in front and back of Center of Post
6' Minimum Clearance to Obstruction from Centerline of Structure

MODEL 12000LB

Lifting Capacity: 12,000 lb.
Max Load per Arm: 3,000 lb.
Rise Height: 80"
Height Overall: 14' 7" or 13' 10"
Width Overall: 137 3/4"
Drive Thru Clearance: 101"
Floor to Overhead: 14' 4" or 13' 7"
Front Arm Reach: 31 13/16" - 54 11/16"
Rear Arm Reach: 31 13/16" - 54 11/16"
Screw Pad Height: 5" - 9"
Inside Columns: 114 9/16"
Motor: 2HP
Voltage Single Phase: 208-230v
Ceiling Height Required: 14' 8"
Concrete shall have a compression of 3000 PSI and a minimum thickness of 4"
12' Minimum Clearance to Obstruction in front and back of Center of Post
6' Minimum Clearance to Obstruction from Centerline of Structure

• Q4P12 Alignment Kit
• Optional Bolt-On Alignment Kit Turns the Q4P12 into a True Alignment Rack.
• Raises Entire Level of Runway for Level 3D 4-Wheel Drive Compatible Rack.
• Provides for Multi-position Turnplate pockets for Maximum Wheel Base Accomadation and Versatility.
• Integrated Rear Slip Plates.
• Front Powdered Coated Turnplates Standard.
• Does NOT Include Optional Rolling Jacks shown to Left.
• Photo to Left Shows Detail View of Radius Gauge Pockets - Showing Multiple Positions Available for Different Wheelbases.

Lifting Capacity: 12,000lb.
Rise Height: 68" (underneath runway)
Length Overall: 249.8"
Width Overall: 135.6""
Inside of Columns: 120"
Height of Columns: 85.51"
Width of Runways: 20"
Length of Runways: 208.42"
Air Supply Required: 85-115 psi
Motor: 2HP
Voltage Single hase: 208-230v
Speed of Rise:  75 Sec

Lifting Capacity: 6,000 lb.
Rise Height: 53 1/4"
Length Overall: 7' 10"
Width Overall: 39 1/2"
Minimum Collapsed Height: 5 1/2"
Pad Height: 7 3/4" - 56"
Hydraulic Hose: 12'
Safety Lock Positions (7): 23 7/8", 30", 35 1/2", 40 1/2", 45", 48 1/8", 53 1/4"
Electric Motor: 1 HP
Voltage: 115v
Speed of Rise: 45 sec
Min Bay Size: 10' x 22'

Professional transmission repair jack. 
Air operation and foot pedal manual operation for ease of use. 
2 stage telescoping for rise heights of 34 1/4" to 73 5/8". 
Built and tested to ANSI standards. 
Fully adjustable saddle. 
Wide base for stability.

3 TON FLOOR JACK

Professional grade automotive service jack. 
Double pump for quick action rise. 
Built and tested to ANSI standards.
Lifting height from 4.8" to 21". 
Safety relief valve to prevent overloading.

Professional Heavy Duty Floor Jack. 
Built and tested to ANSI standards. 
Safety relief valve to prevent overload. 
Self-retracting springs for fast ram restraction. 
Adjustable screw and adapters for height adjutment (standard).
Lifting height 9" - 17".
Working air pressure 90-145 psi.